How much does a 40 × 40 pallet weigh?

About 53 lb (24 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 88 lb. The skid is about 67 lb. Species and moisture change this by up to a third; see the weight guide.

How much weight can a 40 × 40 pallet hold?

It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.

Is 40x40 the same as 40x40?

Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 40x40 has 40 in stringers and 40 in top boards. See pallet dimensions explained.

40 × 40 pallet: dimensions, weight and specs

A 40 × 40 in pallet measures 1016 × 1016 mm. The 40 in side is the stringer length and is stated first. Also called 40 inch square pallet. Common in dairy. Standard builds: stringer pallet 4-3/4 in tall and about 53 lb; block pallet 5-3/4 in tall and about 88 lb; skid 4-1/4 in tall and about 67 lb.

Reviewed September 25, 2026

On this page

Builds compared
Drawing
Dimensions
Where it's used
Standards
Questions

Builds compared

	Stringer pallet	Block pallet	Skid
Overall height	4-3/4 in	5-3/4 in	4-1/4 in
Weight	≈ 53 lb	≈ 88 lb	≈ 67 lb
Entry	Partial 4-way	Full 4-way	2-way
Top deckboards	6	6	6
Top board gap	3 in	3 in	3 in
Nails	78	69	42
Board feet	12.08	20.05	15.42
Parts	14	23	9

Weights in green mixed hardwood, nails included. Each build page lists five species.

40 × 40 stringer pallet drawing

Specs and cut list Edit in the designer

Notes

All dimensions in inches, actual size.
Nails per Uniform Standard Table 5: two per joint on boards up to 5-1/4 in, three up to 7-1/4 in.
2.25 in helical nails.
Interior bottom boards clustered between the notches for fork entry.
Top gap 3.000 in, 63% deck coverage.

Parts list

1	2	Top lead board 5/8 × 5-1/2 × 40
2	4	Top interior board 5/8 × 3-1/2 × 40
3	3	Stringer, notched 1-3/8 × 3-1/2 × 40
4	2	Bottom lead board 5/8 × 5-1/2 × 40
5	3	Bottom interior board 5/8 × 3-1/2 × 40

Title

40×40 stringer pallet

Drawn by

palletdesign.ai

Board feet

12.08

Nails

Weight

53 lb

Scale

NTS

Rev

Dimensions

40 × 40 in is 1016 × 1016 mm. The length, 40 in, is the stringer direction; the width, 40 in, is the length of the top deckboards. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.

Where it's used

Dairy

Standards that list it

ANSI MH1

Which build? stringer pallets (partial 4-way entry), block pallets (full 4-way entry) and skids (2-way entry). See stringer vs block pallets.

Questions

What are the dimensions of a 40 × 40 pallet in millimetres?: 40 × 40 in is 1016 × 1016 mm. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.
How much does a 40 × 40 pallet weigh?: About 53 lb (24 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 88 lb. The skid is about 67 lb. Species and moisture change this by up to a third; see the weight guide.
How much weight can a 40 × 40 pallet hold?: It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.
Is 40x40 the same as 40x40?: Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 40x40 has 40 in stringers and 40 in top boards. See pallet dimensions explained.