How much does a 42 × 42 pallet weigh?

About 55 lb (25 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 91 lb. The skid is about 71 lb. Species and moisture change this by up to a third; see the weight guide.

How much weight can a 42 × 42 pallet hold?

It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.

Is 42x42 the same as 42x42?

Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 42x42 has 42 in stringers and 42 in top boards. See pallet dimensions explained.

42 × 42 pallet: dimensions, weight and specs

A 42 × 42 in pallet measures 1067 × 1067 mm. The 42 in side is the stringer length and is stated first. Also called 42 inch square pallet. Common in telecom, paint. Standard builds: stringer pallet 4-3/4 in tall and about 55 lb; block pallet 5-3/4 in tall and about 91 lb; skid 4-1/4 in tall and about 71 lb.

Reviewed September 25, 2026

On this page

Builds compared
Drawing
Dimensions
Where it's used
Standards
Questions

Builds compared

	Stringer pallet	Block pallet	Skid
Overall height	4-3/4 in	5-3/4 in	4-1/4 in
Weight	≈ 55 lb	≈ 91 lb	≈ 71 lb
Entry	Partial 4-way	Full 4-way	2-way
Top deckboards	6	6	6
Top board gap	3-3/8 in	3-3/8 in	3-3/8 in
Nails	78	69	42
Board feet	12.69	20.77	16.19
Parts	14	23	9

Weights in green mixed hardwood, nails included. Each build page lists five species.

42 × 42 stringer pallet drawing

Specs and cut list Edit in the designer

Notes

All dimensions in inches, actual size.
Nails per Uniform Standard Table 5: two per joint on boards up to 5-1/4 in, three up to 7-1/4 in.
2.25 in helical nails.
Interior bottom boards clustered between the notches for fork entry.
Top gap 3.400 in, 60% deck coverage.

Parts list

1	2	Top lead board 5/8 × 5-1/2 × 42
2	4	Top interior board 5/8 × 3-1/2 × 42
3	3	Stringer, notched 1-3/8 × 3-1/2 × 42
4	2	Bottom lead board 5/8 × 5-1/2 × 42
5	3	Bottom interior board 5/8 × 3-1/2 × 42

Title

42×42 stringer pallet

Drawn by

palletdesign.ai

Board feet

12.69

Nails

Weight

55 lb

Scale

NTS

Rev

Dimensions

42 × 42 in is 1067 × 1067 mm. The length, 42 in, is the stringer direction; the width, 42 in, is the length of the top deckboards. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.

Where it's used

Standards that list it

Which build? stringer pallets (partial 4-way entry), block pallets (full 4-way entry) and skids (2-way entry). See stringer vs block pallets.

Questions

What are the dimensions of a 42 × 42 pallet in millimetres?: 42 × 42 in is 1067 × 1067 mm. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.
How much does a 42 × 42 pallet weigh?: About 55 lb (25 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 91 lb. The skid is about 71 lb. Species and moisture change this by up to a third; see the weight guide.
How much weight can a 42 × 42 pallet hold?: It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.
Is 42x42 the same as 42x42?: Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 42x42 has 42 in stringers and 42 in top boards. See pallet dimensions explained.