What are the dimensions of a 36 × 36 pallet in millimetres?

36 × 36 in is 914 × 914 mm. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.

How much does a 36 × 36 pallet weigh?

About 48 lb (22 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 81 lb. The skid is about 61 lb. Species and moisture change this by up to a third; see the weight guide.

How much weight can a 36 × 36 pallet hold?

It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.

Is 36x36 the same as 36x36?

Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 36x36 has 36 in stringers and 36 in top boards. See pallet dimensions explained.

Pallet sizes

36 × 36 pallet: dimensions, weight and specs

Reviewed September 25, 2026

In short

A 36 × 36 in pallet measures 914 × 914 mm. The 36 in side is the stringer length and is stated first. Also called 3 x 3 pallet. Common in beverage. Standard builds: stringer pallet 4-3/4 in tall and about 48 lb; block pallet 5-3/4 in tall and about 81 lb; skid 4-1/4 in tall and about 61 lb.

Standard builds compared

	Stringer pallet	Block pallet	Skid
Overall height	4-3/4 in	5-3/4 in	4-1/4 in
Weight (approx.)	48 lb	81 lb	61 lb
Entry	Partial 4-way	Full 4-way	2-way
Top deckboards	6	6	6
Top board gap	2-3/16 in	2-3/16 in	2-3/16 in
Nails	78	69	42
Board feet	10.88	18.61	13.88
Parts	14	23	9
Indicative cost	$13.45	$19.65	$14.62

Weights in green mixed hardwood; cost is the engine's estimate at default lumber prices.

36 × 36 stringer pallet drawing

Third-angle views with chain dimensions to every board edge, nail locations and the parts list. Full specs and cut sizes.

Notes

All dimensions in inches, actual size.
Nails per Uniform Standard Table 5: two per joint on boards up to 5-1/4 in, three up to 7-1/4 in.
2.25 in helical nails.
Interior bottom boards clustered between the notches for fork entry.
Top gap 2.200 in, 69% deck coverage.

Parts list

1	2	Top lead board 5/8 × 5-1/2 × 36
2	4	Top interior board 5/8 × 3-1/2 × 36
3	3	Stringer, notched 1-3/8 × 3-1/2 × 36
4	2	Bottom lead board 5/8 × 5-1/2 × 36
5	3	Bottom interior board 5/8 × 3-1/2 × 36

Title

36×36 stringer pallet

Drawn by

palletdesign.ai

Board feet

10.88

Nails

Weight

48 lb

Scale

NTS

Rev

Dimensions

36 × 36 in converts to 914 × 914 mm. The length, 36 in, is the stringer direction; the width, 36 in, is the length of the top deckboards.

Where it's used

Beverage

Standards that list it

ANSI MH1

Choosing a build

36 × 36 stringer pallet: partial 4-way entry, about 48 lb. Read more about the stringer pallet.
36 × 36 block pallet: full 4-way entry, about 81 lb. Read more about the block pallet.
36 × 36 skid: 2-way entry, about 61 lb. Read more about the skid.

Questions

What are the dimensions of a 36 × 36 pallet in millimetres?: 36 × 36 in is 914 × 914 mm. Overall height depends on the build: 4-3/4 in for the stringer pallet, 5-3/4 in for the block pallet, 4-1/4 in for the skid.
How much does a 36 × 36 pallet weigh?: About 48 lb (22 kg) for the stringer pallet in mixed hardwood, green. The block pallet is about 81 lb. The skid is about 61 lb. Species and moisture change this by up to a third; see the weight guide.
How much weight can a 36 × 36 pallet hold?: It depends on how the pallet is supported: floor-stacked, racked or stacked loads each get a different safe load, and the same pallet can rate several times higher on the floor than in a rack. Certified ratings come from a Pallet Design System analysis or physical testing; see pallet load capacity.
Is 36x36 the same as 36x36?: Same footprint, different pallet. The first number is the stringer (or stringerboard) length, so a 36x36 has 36 in stringers and 36 in top boards. See pallet dimensions explained.